| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Minimum neck block dimensions? http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=3222 |
Page 1 of 1 |
| Author: | Josh H [ Wed Sep 14, 2005 1:25 pm ] |
| Post subject: | |
I am wondering what the dimension are for the neck blocks you guys are using? I have been working at getting the weight down on my guitars and am wondering how small I can get the block. I started with a blank yesterday and after some sanding ended up with a bock that is 2.5 in. wide and 1 in. thick, with some additional wood trimmed of the corners which are not glued to the sides. Is this to small? My neck joint is a 14 degree dovetail that is cut a little under ? in. into the block. The dovetail is secured with 2 bolts, instead of gluing that joint. Any thought would be appreciated. Josh |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|